DAMS D6050 Series

PDF IconView D6050 Series datasheet

Positioner Specifications
  General
Composition Wood (base), acrylic, fiberglass, PLA. Overall, over 75% non-metalic construction with an ultra-low metallic head
Overall Dimensions 24" W x 34" D x 58" H
(Note: depth and height are adjustable; these figures are max)
Overall Weight 85 pounds for 2-axis base model
  Turntable
Frequency Ranges DC to 6 GHz (DAMS D6050-6)
DC to 18 GHz (DAMS D6050-18)
DC to 40 GHz (DAMS D6050-40)
DC to 50 GHz (DAMS D6050-50)
Platform Movement Horizontal 0.02º precision stepper motor with worm gear drive
Movement Resolution Up to 0.02º turntable (elevation) resolution
Movement Range 360º azimuth range or ± 180º elevation range with re-indexable hardware limits
Drivetrain Precision worm gear table with 1.8º stepper motor
Gear Ratio 90:1
Position Feedback None (open loop, position maintained by software)
AUT Mounting 24" diameter x 0.75" acrylic plate
1/4"-20 hole array
(M6 holes available upon request)
Weight Capacity 100 pounds (45.5 kg) maximum @ level position with slide rails
(capacity can decrease with certain angle configurations)
Rotary Joint Precision, low-noise rotary joint (SMA, 2.92mm or 2.4mm)
  Roll / Phi Axis
Frequency Ranges DC to 6 GHz (DAMS D6050-6)
DC to 18 GHz (DAMS D6050-18)
DC to 40 GHz (DAMS D6050-40)
DC to 50 GHz (DAMS D6050-50)
Movement Resolution Up to 0.025º - full step mode
Movement Range 360º azimuth range or ± 180º elevation range with re-indexable hardware limits
Drivetrain Precision worm gear table with 1.8º stepper motor
Gear Ratio 90:1
Platform Max Speed 4 R.P.M. / 24º per second (light load)
AUT Mounting Options 10" diameter x 0.5" acrylic plate with 10-32 hole array
(M4 holes array available upon request)
Weight Capactiy 25 pounds (11.34 kg)
Rotary Joint Precision, low-noise rotary joint (SMA, 2.92mm or 2.4mm)
  Electrical Specifications
Controller Type Internal 2-axis microprocessor-based controller
Resolution Full-step or half-step
Motor Current 2.0A per motor phase
Cooling Internal 24v fan
Communication Interface 9-pin D-sub RS232 (includes USB to RS232 adapter)
Cable Interface Ultra high-quality cable with SMA connectors
Ultra-precision, low-noise rotary joint with SMA connectors
Cable Length 3-meters (included)
Longer available by request (may incur additional cost)
Input Voltage 24v DC 5A - 2.5mm DC barrel connector
Power Supply 24v DC 5A - 110/220v input (included)
Environmental Conditions Operating temp: 0° C to 45° C (32° F to 104° F)
No condensation
Transport temp: -40° C to 60° C (-40° F to 140° F)
10% to 90% relative humidity
No condensation within 72 hours